• 3 Zones Temperature Humidity Chamber

3 Zones Temperature Humidity Chamber

  • Climate Chamber - 3 Zones Temperature Humidity Chamber
Click To
Send Enquiry
Detailed Introduction Parameters


Temp.&Humi. Test Cabinet ( climatic/ climate/ environment/environmental test chambers) simulate the effects that a range of temperature and humidity conditions have on a product or material, for example telecommunications equipment or photovoltaic solar panels that are exposed to outdoor temperature and humidity conditions. They have applications in industries as disparate as food science, semiconductors, and military quality assurance. A good temperature humidity chamber is essential for evaluating potential success or failure of a product in the field. Climate test chambers come in a variety of sizes, from a small box that fits on the bench top to a room-sized chamber for large objects or for testing large batches of product simultaneously. Temperature ranges from +10°C to 100°C and relative humidity ranges between 30% and 95% are available. A climate test chamber can also be used when constant climate conditions (temperature and/or humidity) are needed for product testing.


1 Large system capacity: 120 patterns*1200 steps   

2 Circulation Setting: Max. 9999 cycles.  

3 PID+SSR/SCR controller. 

4 Curves drawing.  

5 Independent test areas, easy operation.

6 RS-232&RS-485 communication interface.

7 Composed of three test areas.Each test area can individually test high temperature, low temperature or constant temperature and humidity conditon.

8 Touch screen controller

9 Best after sales service: one year free parts maintenance.

10 Meet international test standards.

11 Customization  is available & welcomed.
Model YTHG-072 YTHG-162
Inner chamber size(cm) 45×40×40 60×45×60
Exterior chamber size (cm) 100x200x170 120x215x185
Testing temperature range -70℃,-60℃, -40℃, -20℃, 0℃~150℃,other temperature can be customized
Testing humidity range 20%RH~98%RH(low humidity10%RH~98%RH或5%RH~98%RH can be customized)
Temp.humi.fluctuation ±0.3℃;±0.5%RH
Temp.humi.uniformity ±1.5℃;±3%RH (empty loading after stablize for 30 mins)
Temp.humi.resolution 0.01℃;0.1%RH
Heating&cooling  time ℃/min Heat-up:3℃/min(average),cool-down:1℃/min(average)
Exterior chamber material Cold rolled plate + Powder coating
Interior chamber material SUS#304 Stainless steel
Insulation material PU+ fiberglass wool
Circulation system Centrifugal fan air circulation system
Heating system SUS# Stainless steel high-speed heater
Humidification system Electrothermal steam humidification
Dehumidifying ADP critical dew point cooling / dehumidifying method
Refrigeration system Compressor + Finned evaporator + Air(Water) cooled condenser
Controlling system Touch screen controller+SSR+PID
Other components Vacuum glass observation window
Test hole (50mm)
Control status indicator
Interior light
Compartment shelf (2 freely adjustable)
Safety protection device Humidification system overheat protection
Compressor overload protection
Control system overload protection
Overload indicator
Phase sequence protection
Water shortage protection
High voltage and low voltage protection
Over temperature protection
Water supply delay protection
Fan overcurrent protection
Power supply AC 1Ψ 220V; 3Ψ380V 60/50Hz 
Customization service Non-standard or special requirements are all welcome

Scroll Down

+86 13926819592 info@yuanyao-tech.com +86 13926819592 +86 13926819592
Copyright © 2020 yuanyao-tech All Rights Reserved