Walk In Climate Chamber |
Model |
YWER |
Inner chamber size W×H×D(cm) |
Non-standard |
Exterior chamber size W×H×D(cm) |
Temperature range |
0ºC;-20ºC;-40ºC;-60ºC,-70ºC~+70ºC(+80ºC) |
Humidity range |
30%RH~95%RH |
Temp.humi.fluctuation |
±0.3ºC;±0.5%RH |
Temp.humi.uniformity |
±3ºC; ±5%RH |
Indication Resolution |
0.1%RH Temperature:0.01 humidity:0.1%RH |
Heat up ang cool down time |
Heat-up:2ºC/min(Average),cool-down time 1ºC/min(Average) |
Air cirulation system |
Centrifugal fan air circulation system |
Heating system |
SUS# Stainless steel high-speed heater |
Humidification system |
Electrothermal steam humidification |
Refrigeration system |
Compressor + Finned evaporator + Air(Water) cooling condenser |
Dehumidifying system |
dew point dehumification method |
Controlling system |
Touch screen controller |
Exterior chamber material |
Cold rolled plate + Powder coating |
Inner chamber material |
SUS#304 Stainless steel |
Insulation material |
PU |
Other components |
Vacuum glass observation window |
∅50mm ∅100mm ∅160mm(Optional) |
Control status indicator |
View light |
Overheat protection circuit breaker |
Safety protection device |
Humidification system overheat protection |
Compressor overload protection |
Control system overload protection |
Overload indicator |
Phase sequence protection |
Water shortage protection |
High voltage and low voltage protection |
Over temperature protection |
Water supply dely protection |
Fan overcurrent protection |
Power supply |
AC 3ψ 380V 60/50Hz Power supply can be customized |
Customization service |
No-standard or special requirements are all welcome |