• Heat Moisture Controlling Test Chambers

Heat Moisture Controlling Test Chambers

  • Climate Chamber - Heat Moisture Controlling Test Chambers
Click To
Send Enquiry
Detailed Introduction Parameters


Environmental Test Chambers are mainly and widely used for various types of testings for material / product quality control, such as prototype evaluation, research & development testing, production quality control testing, accelerated stress testing, reliability testing, failure analysis, and any other application where environmental simulation is needed.


1. Programmable Controller with RS232C, 7'' LCD touch screen controller.

2. Stainess steel Interior, galvanized steel sheet exterior.

3.2PCS stainless steel loading shelves free.

4. Multipane detection viewing window with heater to avoid fog.

5.60mm diameter feed-through port.

6. Floor stand with castors.
Temperture Humildity Chamber
Model YTH-080 YTH-150 YTH-225 YTH-408 YTH800 YTH1000
Inner chamber size W×H×D(cm) 40×50×40 50×60×50 60×75×50 80×85×60 100×100×80 100×100×100
Exterior chamber size W×H×D(cm) 60×172×120 70×174×130 70×172×181 100×182×197 120×197×197 120×197×217
Testing temperature range -70ºC,-60ºC,-40ºC,-20ºC,0ºC~150ºC,Other temperture can be customized
Testing humidity range 20%RH~98%RH(low humidity10%RH~98RH or 5%RH~98%RH can be customized
Temp.humi.fluctuation ±0.3ºC;±0.5%RH
Temp.humi.uniformity ±2ºC;±3%RH (empty loading after stablize for 30mins)
Temp.humi.resolution 0.01ºC;0.1%RH
Heating&cooling time ºC/min Heat-up:3ºC/min(average),cool-down:1ºC/min(average)
Exterior chamber material Cold rolled plate + Powder coating
Inner chamber material SUS#304 Stainless steel
Insulation material PU
Circulation system Centrifugal fan air circulation system
Heating system SUS# Stainless steel high-speed heater
Humidification system Electrothermal steam humidification
Dehumidifying ADP critical dew point cooling/ dehumidifying method
Refrigeration system Compressor + Finned evaporator + Air(Water) cooling condenser
Controlling system Touch screen controller
Other components Vacuum glass observation window
Test hole (50mm)
Control status indicator
View light
Compartment shelf (2 freely adjustable)
Safety protection device Overheat protection circuit breaker
Humidification system overheat protection
Compressor overload protection
Control system overload protection
overload indicator
Phase sequence protection 
Water shortage protection
High voltage and low voltage protection
Over temperature protection
Water supply dely protection
Fan overcurrent protection
Power supply AC 1ψ 220V; 3ψ380V 60/50Hz
Customization service No-standard or special requirements are all welcome

Scroll Down

+86 13926819592 info@yuanyao-tech.com +86 13926819592 +86 13926819592
Copyright © 2020 yuanyao-tech All Rights Reserved