FAD (Free Air Delivery): Refer to the FAD value on the nameplate; do not rely solely on the power rating.
Required Accessories (Universal for All Models)
1. Air receiver tank (for pressure stabilization; prevents pressure fluctuations and drift in deposition rates)
2. Primary oil-water separator + secondary precision filter (0.01μm)
3. Automatic drain valve
4. PU air tubing (φ8/φ10); keep the piping as short as possible with minimal bends
Important Notes
1. Single-nozzle chambers: Most models with a capacity of 480L or less feature a single nozzle; models ≥800L typically use dual nozzles, resulting in significantly higher air consumption.
2. If multiple salt spray chambers share a single air compressor, calculate the total air flow required for all units and add a 20% safety margin (multiply by 1.2).
3. "Mini" silent compressors without an air receiver tank are not recommended; they provide unstable pressure, making it difficult to meet salt spray test standards.
4. For long-term, continuous CASS or AASS (copper-accelerated) salt spray testing, it is recommended to select a higher-capacity compressor and increase the flow rate safety margin.