News

News

Introduction of Nitrogen-Purged Ovens

Working Principle of Nitrogen Ovens:

High-purity nitrogen is introduced to displace the air inside the chamber, reducing the oxygen concentration. Heating and baking then take place in an oxygen-free or low-oxygen environment maintained under slight positive pressure.

Atmospheric O₂ is the primary cause of high-temperature oxidation and oxygen-inhibition (which hinders curing). Nitrogen acts as an inert protective gas and does not participate in chemical reactions.

Two Types of Displacement Methods:
 
Purge-type (Continuous Nitrogen Flow): Nitrogen is continuously supplied, gradually flushing out the existing air and volatile substances through an exhaust port to maintain low oxygen levels. 
This design is simple and cost-effective, typically achieving a residual oxygen level of 200–500 ppm. It is suitable for standard PCB processing, silver paste curing, and preventing oxidation on metal components.
Vacuum-Nitrogen Displacement (Vacuuming + Nitrogen Filling Cycle): This process involves alternating between vacuuming and nitrogen filling—repeated 2–3 times—to achieve rapid displacement. Residual oxygen can be reduced to 10–50 ppm, offering superior moisture and oxygen removal. (We also can provide vacuum nitrogen oven)
 
This method is ideal for semiconductors, lithium batteries, and applications requiring high-performance silver pastes.
 
Pressure Control: The chamber is maintained at a slight positive pressure (30–50 Pa) to prevent external air from leaking back in and causing oxygen levels to rise.
 
Heating: Most models utilize hot-air circulation to ensure uniform temperature distribution. An oxygen probe is often integrated to monitor oxygen levels in real time.
 
Protective Functions:
✅ Metal Components: Prevents high-temperature oxidation, yellowing, and blackening.
✅ Adhesives/Resins: Eliminates oxygen-inhibition, ensuring surfaces are not tacky and that curing is thorough.
✅ Electronic Components: Allows for moisture-removal baking while protecting solder pads and coatings from discoloration.

Important Note: Standard nitrogen ovens cannot pull a vacuum (unless they are specifically designed as vacuum-nitrogen integrated systems); a typical nitrogen-purged oven relies solely on continuous nitrogen flushing.

Scroll Down

+86 13926819592 info@yuanyao-tech.com +86 13926819592 +86 13926819592
Copyright © 2020 yuanyao-tech All Rights Reserved