The working principle of the vacuum oven is to use a vacuum pump to evacuate air and dehumidify, so that a vacuum state is formed in the test area, the boiling point of water is reduced, and the drying speed is acceleratied.
Today we introduce vacuum oven degassing process, it is a technology that uses a vacuum environment to remove bubbles from materials.
Vacuum oven degassing process is mainly used in industries such as LED lamps, LED epoxy resins, fluorescent silicone, plastic toys, transformer glue potting, resin crafts, AB glue, silicone rubber, polyurethane, bonding black glue degassing, and electronic product potting. Its working principle is to reduce the pressure to allow the gas in the material to escape, thereby achieving the purpose of degassing. Specifically, the material to be degassed is placed in a vacuum oven, and then vacuumed so that the air pressure in the vacuum oven is lower than the external atmospheric pressure, so that the gas in the material can escape. As the air pressure gradually decreases, the bubbles in the material will gradually be discharged until the desired degassing effect is achieved.
The vacuum degree of Yuanyao standard vacuum oven can reach 3KPa, we also can make lower pressure(100Pa, 1.3Pa) as the requirement of clients.
