- Why Yuanyao
- Service & Support
How should industrial oven maintain?As follows:
1. Regularly check whether the heating tube is damaged or the circuit is aging.
2. Regularly check whether the vent is blocked, and regularly clean up dust accumulation.
3. Clean the surface and the dust in the studio, and keep the machine clean and hygienic.
4. Open the exhaust valve before energizing.
5. When the industrial oven is not running, turn off the power supply and turn off the oven in time.
6, use non-explosion-proof electric oven, do not bring volatile things into the oven.
7. Observe and adjust the temperature in the box at any time to meet the requirements of the drying process.
8. Keep the electric oven clean, check and remove the oxide scale near the resistance wire in the oven.
9, sudden power failure, to turn off the power switch and heating switch, to prevent automatic start when the call.
10. Regularly check whether the fan is running normally and whether there is any abnormal sound. If there is any, shut down the machine immediately for inspection.
11. Regularly check whether the temperature controller is accurate. If not, please adjust the static compensation of the temperature controller or the sensor repair value.
12. Check the insulation of the power line before switching on. No leakage is allowed.There should be no contact between the resistance wires of the heater to prevent short circuit.
To sum up, above is how should industrial oven maintain answer.To the processing factory that needs to use industrial oven to work, the maintenance of industrial oven is undoubtedly the most important, hope the above is just a point summary can help everybody, let industrial oven can better run work, improve efficiency.